Application：
1. Can be used in Zone 1、 Zone 2、 zone 21 and zone 22 dangerous places.
2. Can be used in II A, II B, IIC explosive atmosphere or hummable dust atmosp here.
3. Can be used in environment which has high requirements on dampness and protection;
4. Maintenance-free design: areas for maintaining inconveniently.
Luminous intensity Mode implication
distribution curve
Feature
1. Shell made of alloy ZL102 die cast by High Speed. After shot blasting the surface of high-voltage electrostatic spray, high strength, good corrosion resistance.
2. Transparent polycarbonate cover high anti-corrosion materials, use and protection of diffuse . Corner designed to prevent glare, which can effectively reduce the operation, and Construction workers eye irritation, avoid discomfort and fatigue.
3. High-purity aluminum reflector, anodized, high reflection efficiency.
4. Lamp shape is simple, elegant, integrated-design, with good waterproof and dustproof capabilities and strong anti-corrosion. Components Connected with silicone seal between, the seal reliability, protective performance.
5. Exposed fasteners with high anti-corrosion protection of stainless steel bolts out, the user can quickly open wiring, maintenance is very convenient Induction loop shape using light sources, energy saving, environmental protection, high light efficiency, high luminous efficiency, long life and high color rendering.
6. Induction loop shape using light sources, energy saving, environmental protection, high light efficiency, high luminous efficiency, long life and high color rendering.
7. Source chamber, electrical wiring chamber cavity and are set up independently, reliable heat dissipation to ensure reliable long-life lamp applications.
8. Lamp factory has been equipped with light source.
9. Suitable for steel pipe wiring.
10. Suitable for GB3836，GB12476，IEC60079，IEC61241 standard.
Main technical parameters：
1. Ex-mark: Exde ⅡC T4 Gb/Ex tD A21 IP65 T80℃
2. Protection grade: IP65
3. Corrosion-proof grade: WF1
4. Rated voltage: AC220V/50Hz
5. Matching lamp sources: electromagnetic induction lamp
(electrode less induction lamp): 40W, 50W,80W,120W,150W
6. Cable 's specification:Φ10mm~Φ14mm
7. Ingress thread specification: G3/4"
Features of the electromagnetic induction lamp
1. Long life; incandescent, fluorescent, energy saving lamps and other gas discharge lamp has a filament or electrode, and the filament or electrode sputtering effect is precisely the limit lamp life is bound components. Induction Lamp no electrodes, depending on the electromagnetic induction principle and the principle of a combination of fluorescent and discharge light, so there is bound to limit the life of components. Life only on the level of quality electronic components, circuit design and manufacturing process foam body, the general life of up to 50,000 to 100,000 hours
2. Energy saving, environmental protection; using solid amalgam, there can be more than 99% recovery rate, is the real environmental green light.
3. No flicker; Because of its high frequency, so as "no strobe" effect, not cause eye fatigue, eye health
4. color rendering index is good; color rendering index more than 80, light color and soft, showing the natural color of the illuminated object
5. Color temperature; from 2700K ~ 6500K be selected by the customer.
6. Without preheating; can start immediately and re-start, many times there will be no ordinary switch electrode discharge lamp with a recession in the light。
7. Electrical properties; high power factor, low harmonic current, constant voltage power supply, a constant luminous flux output.
|
